| Enclosure |
| |
|
 |
Space Optimization
Housed within a 19" industry-standard rack, SuperBlade servers reduce server footprint in the data center. Power, cooling and networking devices are aggregated in the rear of the chassis which optimizes the required amount of space.
Up to ten blade servers can be installed in a 7U chassis. Compared to the 10U of rack space that ten 1U servers would normally require as individual servers, the SuperBlade provides about 50% density savings with 60 servers and 24 switches in a 42U rack.. |
|
| Cable Reduction |
The SuperBlade server chassis enclosure greatly simplifies the cabling process by aggregating cabling of ten servers at once. Up to 90% of network, power, and KVM cabling required for ten 1U servers are reduced by moving to blade servers in a single chassis.
These cabling reductions continue across networking, SAN connectivity, and management
controllers.
Reducing the number of cables speeds up the deployment of servers and helps reduce troubleshooting issues by presenting fewer physical connections to the servers.
|
| |
| |
| Enclosure SBE-714D |
 |
. Up to 14 hot-plug processor blades
. One hot-plug Gigabit Ethernet switch
. Supports Intel based blades
. 8 cooling fans |
Gigabit Ethernet Pass-Through Module |
Hot-pluggable gigabit Ethernet pass-through module |
Management
Module |
One hot-plug management modules providing remote
KVM and IPMI 2.0 functionalities
(comes standard with each enclosure) |
Power Supply |
Up to four hot-swap 1400W power supplies, N+1 redundant |
Dimensions |
12.1" x 18.5" x 29" |
|
|
| |
| Enclosure SBE-710E |
| |
 |
. Up to 10 hot-plug processor blades
. One hot-plug 4x DDR InfiniBand switch
. Up to two hot-plug Gigabit Ethernet switches
. Supports both Intel and AMD based blades
. 16 cooling fans
|
|
Gigabit Ethernet Pass-Through Module |
Up to two hot-pluggable gigabit Ethernet pass-through modules |
Management
Module |
. Up to two hot-plug management modules providing remote
KVM and IPMI 2.0 functionalities
. One management module comes standard with each enclosure
|
Power Supply |
Up to four hot-swap 1400W / 2000W power supplies,
N+1 redundant |
Dimensions |
12.1" x 18.5" x 29" |
|
|
| |
| |
|
|
|
| SuperBlade |
 |
|
